Programmator Hwk Ufs 2 Micro Poslednee Obnovlenie

C1-01:) Connect phone on selected interface. Dead Mode is Selected Waiting for USB device. --- Press phone's power button or insert charger! --- Connection opened successfully DBG: F00A1FB10100FF CPUID: XGOLD 213 2nd boot Ok, 01 2nd ready Sending Algo, CC Algo sent Ok BL: Quantum_Bootloader_10.37_M1S1 Speed accepted, use 6.500.000 FLASHID: 89008289 FLIC conf set, RST set Boot done! ===Flashing [MCU]=== File: rm607__03.35.mcusw Image: rm607__03.35.mcusw_ebl_psi.fls Cert block found, sending. Cert sent Found 5 region(s) Processing Region 1/5 Erase, Start: 0x40000000, Len: 0x00020000 Erasing, wait. Erase done Write, Start: 0x40000000, Len: 0x00020000 Flashing, wait.

Comment1, gt_racing_2_free_download_for_mobile, 098696, http://appec.

Region flash done Processing Region 2/5 Erase, Start: 0x40040000, Len: 0x00040000 Erasing, wait. Erase done Write, Start: 0x40040000, Len: 0x00040000 Flashing, wait. Region flash done Processing Region 3/5 Erase, Start: 0x40080000, Len: 0x00020000 Erasing, wait. Erase done Write, Start: 0x40080000, Len: 0x00020000 Flashing, wait. Region flash done Processing Region 4/5 Erase, Start: 0x400A0000, Len: 0x00100000 Erasing, wait. Erase done Write, Start: 0x400A0000, Len: 0x00100000 Flashing, wait.

Region flash done Processing Region 5/5 Erase, Start: 0x40400000, Len: 0x01800000 Erasing, wait. Erase done Write, Start: 0x40400000, Len: 0x01780000 Flashing, wait. Region flash done ===Flashing [PPM]=== File: rm607__03.35.ppm_i Image: package_i.ppm_ebl_psi.fls Cert block found, sending. Cert sent Found 1 region(s) Processing Region 1/1 Erase, Start: 0x41C00000, Len: 0x00600000 Erasing, wait. Erase done Write, Start: 0x41C00000, Len: 0x0038D150 Flashing, wait.

Region flash done ===Flashing [CNT]=== File: rm607__03.35.image_i_0595568 Image: package_i_0595568.image.fls Cert block found, sending. Cert sent Found 2 region(s) Processing Region 1/2 Erase, Start: 0x42200000, Len: 0x01C60000 Erasing, wait. Erase done Write, Start: 0x42200000, Len: 0x00B80000 Flashing, wait. Region flash done Processing Region 2/2 Erase, Start: 0x43E60000, Len: 0x000E0000 Erasing, wait. Erase done No write data, skip Flashing done, rebooting. -> Infineon info: Do FullFactory Sets after flashing Flashing Done! Connect phone on selected interface.

Series 40 Device detected! - Ok Reading Phone Info.

This UFS flashing box supports a variety of the mobile phone, brands and Android versions. Just one tap of the finger, you will get latest upgraded flashed phone in your hands. To flash your Android phone using UFS box, you also are required to download and install the USB driver. The link of the USB driver also has been given at the bottom, without of that USB driver; your mobile phone may not be able to connect with this flashing box. To flash your phone via this box, you need to take care of something.

Like, before flashing of the phone, you should create a backup disk. Like, if the process goes wrong and you ended at a closed door, you might be able to restore the data to flash the phone all over again. Or if you are trying to get custom recovery of your phone, create the backup.

Before connecting your mobile phone to this box, enable the USB debugging of the phone. As, sometimes, you made a setting not acceptable for any OS, so, go to the setting, see developer option, and enable the USB debugging on the phone. If you want to flash your mobile phone with the custom or stock ROM, but do not know how to do, follow the steps which I am going to narrate in next few lines. First, remove your batter off from the mobile phone Enable the USB debugging, install the UFS box setup and USB driver properly and restart the computer at least once.

Now, pick a data cable, it would be ideal if you got genuine one Now, connect one side of the data cable with the phone and the other side with the computer, in which you already have installed the setup and drivers etc. Insaniquarium the revenge of the fish. The mobile phone should be off, with removed battery Now, when you had connected the phone, with the UFB Flashing box, there will be a screen on your computer showing the basic info and mobile phone brand etc. Now, you should have the firmware files on your computer with which you are going to flash your mobile phone.